pumpingStation/wiki/Reference-Contracts.md

Reference — Contracts

Note

Full topic contract, configuration schema, and child-registration filters for pumpingStation. The topic-contract and data-model sections are regenerated by npm run wiki:all — do not hand-edit between the BEGIN AUTOGEN / END AUTOGEN markers. Source of truth for everything on this page: the node's src/commands/index.js, src/specificClass.js configure(), and the schema at generalFunctions/src/configs/pumpingStation.json.

For an intuitive overview, return to the Home.

---

Topic contract

The Unit column reflects each descriptor's units: { measure, default } declaration. The default unit is what the commandRegistry coerces incoming msg.unit values to before the handler runs.

Canonical topic	Aliases	Payload	Unit	Effect
set.mode	changemode	string	—	Switch the station between auto / manual control modes.
child.register	registerChild	string	—	Register a child node (machine group, measurement, …) with this station.
cmd.calibrate.volume	calibratePredictedVolume	any	volume (default m3)	Calibrate the predicted-volume integrator to a known basin volume.
cmd.calibrate.level	calibratePredictedLevel	any	length (default m)	Calibrate the predicted-volume integrator to a known basin level.
set.inflow	q_in	any	volumeFlowRate (default m3/h)	Push a measured inflow value into the basin balance.
set.outflow	q_out	any	volumeFlowRate (default m3/h)	Push a measured outflow value into the basin balance.
set.demand	Qd	any	volumeFlowRate (default m3/h)	Operator outflow demand setpoint for the station.

---

Data model — getOutput() shape

Keys composed each tick by specificClass.getOutput() and emitted via outputUtils.formatMsg on Port 0. Delta-compressed: consumers see only the keys that changed.

Key	Type	Unit	Sample
direction	string	—	"steady"
dryRunLevel	number	—	0.20400000000000001
dryRunSafetyVol	number	—	0.20400000000000001
flowSource	null	—	null
heightBasin	number	m	1
highVolumeSafetyLevel	number	—	2.45
highVolumeSafetyVol	number	—	2.45
inflowLevel	number	m	2
inletPipeDiameter	number	—	0.4
maxVol	number	m3	1
maxVolAtOverflow	number	m3	2.5
minHeightBasedOn	string	—	"outlet"
minVol	number	m3	0.2
minVolAtInflow	number	m3	2
minVolAtOutflow	number	m3	0.2
outflowLevel	number	m	0.2
outletPipeDiameter	number	—	0.4
overflowLevel	number	m	2.5
percControl	number	%	0
predictedOverflowRate	number	—	0
predictedOverflowVolume	number	—	0
predictedUnderflowVolume	number	—	0
surfaceArea	number	m2	1
timeleft	null	s	null
volEmptyBasin	number	m3	1
volume.predicted.atequipment.wikigen-pumpingstation-id	number	m3	0.2

Sample values come from a stub instantiation in wikiGen — in a live deployment the volume key is shaped volume.<variant>.<position>.<childId> per the standard Measurement Key Shape.

---

Configuration schema — editor form to config keys

Source of truth: generalFunctions/src/configs/pumpingStation.json.

Basin geometry (config.basin)

Form field	Config key	Default	Unit	Notes
Basin Volume	basin.volume	1	m3	Total geometric storage from floor to rim
Basin Height	basin.height	1	m	Floor-to-rim wall height
Inlet Elevation	basin.inflowLevel	2	m	Bottom of incoming pipe, from floor
Outlet Elevation	basin.outflowLevel	0.2	m	Top of pump-suction pipe, from floor
Inlet Pipe Diameter	basin.inletPipeDiameter	0.4	m	For future hydraulic upgrades
Outlet Pipe Diameter	basin.outletPipeDiameter	0.4	m	For future hydraulic upgrades
Overflow Level	basin.overflowLevel	2.5	m	Physical overflow weir crest

Safety thresholds (config.safety)

Form field	Config key	Default	Notes
High-Volume Safety %	safety.highVolumeSafetyThresholdPercent	98	Trigger high-volume safety at this fill %
Dry-Run Safety Level	safety.dryRunLevel	0.2	Below this level all pumps stop
Enable High-Volume Safety	safety.enableHighVolumeSafety	true	Master switch

Warning

Earlier versions used enableOverfillProtection and overfillThresholdPercent. Those names are deprecated. The current canonical names are enableHighVolumeSafety and highVolumeSafetyThresholdPercent. See .claude/refactor/OPEN_QUESTIONS.md for the alias-removal timeline.

Control mode (config.control)

Form field	Config key	Default	Notes
Mode	control.mode	"levelbased"	One of levelbased, manual, flowbased, pressureBased, percentageBased, powerBased, hybrid*. Asterisked modes are placeholders in code.
Level Curve Type	control.levelbased.curveType	"linear"	linear or log
Log Curve Factor	control.levelbased.logCurveFactor	0.5	Slope tuning for log curve
Min Level	control.levelbased.minLevel	0.3	Demand hard-zero below this
Start Level	control.levelbased.startLevel	0.5	Falling-ramp returns to 0 % here
Stop Level	control.levelbased.stopLevel	0.4	Schmitt-trigger lower bound for pump-count keep-alive
Max Level	control.levelbased.maxLevel	2.3	Demand saturates at 100 % here
Enable Shifted Ramp	control.levelbased.enableShiftedRamp	true	Hysteresis-armed shift between rising / falling ramps
Manual Flow Setpoint	control.manual.flowSetpoint	0	Honoured in manual mode

General (config.general)

Form field	Config key	Default	Notes
Time-left full / empty threshold	general.timeleftToFullOrEmptyThresholdSeconds	120	ETA below this triggers warning state
Flow dead-band	general.flowThreshold	1e-4 m³/s	Net-flow below this is treated as steady

---

Child registration

Source: nodes/pumpingStation/src/specificClass.js configure(), lines 107–116.

Software type	Filter	Wired to	Side-effect
measurement	any	_subscribeMeasurement	Subscribes to the measurement's emitter; updates basin balance
machine	only if no machinegroup parent is present	direct dispatch	Bypassed when an MGC is the predicted-flow source
machinegroup	any	_subscribePredictedFlow	Reads aggregated predicted flow from the MGC
pumpingstation	any	_subscribePredictedFlow	Cascaded PS — reads predicted outflow of upstream station

The router only subscribes to the highest-level aggregator for predicted flow. If an MGC is present, direct machine children are not double-counted.

---

Unit policy

Source: nodes/pumpingStation/src/specificClass.js lines 21–30.

Quantity	Canonical (internal)	Output (rendered)
Flow	m3/s	m3/s (also netFlowRate)
Level	m	m
Volume	m3	m3
Pressure	Pa	(not surfaced)
Power	W	(not surfaced)
Temperature	K	(not surfaced)

overflowVolume and underflowVolume are explicitly listed in the policy output so the MeasurementContainer keeps the integrator's m3 unit on those streams (FlowAggregator writes spill / underflow per tick).

---

Related pages

Page	Why
Home	Intuitive overview
Reference — Architecture	Code map, state chart, lifecycle
Reference — Examples	Shipped example flows
Reference — Limitations	Known limitations and open questions
EVOLV — Topic Conventions	Platform-wide topic rules
EVOLV — Telemetry	Port 0 / 1 / 2 InfluxDB layout