levelBased ramp + engagement:
- Ramp foot is now max(startLevel, holdLevel) — was max(startLevel,
inflowLevel). inflowLevel is basin geometry, not a control setpoint;
the implicit hold zone it created was causing pumps to "start at
inflowLevel" instead of startLevel.
- New optional `holdLevel` config (defaults to startLevel = no hold band).
When raised, pumps engage at startLevel and hold at 0 % = MGC flow.min
across [startLevel, holdLevel], then ramp 0..100 % to maxLevel.
- Engagement decided in run() (not in `_applyMachineGroupLevelControl`):
rising-edge hysteresis arming gates a clean turnOff early-return.
Once armed, the helper always forwards setDemand(pct, '%') — 0 %
legitimately means "engaged at min flow", no more soft-turnOff at
the boundary.
- Disengagement paths (minLevel hard-stop, stopLevel falling-edge,
pre-arming idle) now all clear the shifted-ramp hysteresis state too.
- Threshold validator drops the startLevel ≤ inflowLevel rule; adds
startLevel ≤ holdLevel < maxLevel (only checked when holdLevel is
explicitly set, so default-null doesn't false-flag).
MGC unit math:
- Replace direct group.handleInput(percent) with group.setDemand(pct, '%')
in _applyMachineGroupLevelControl. The percent → m³/s resolution now
lives in MGC.setDemand (committed separately in the MGC submodule).
FlowAggregator variant picking:
- New _pickFlowSum() helper mirrors selectBestNetFlow's variant
precedence (measured first, then predicted) and resolves each side
independently. Realistic mixed case — real measured upstream sensor +
predicted pump outflow — now feeds the predicted-volume integrator.
Was reading only `flow.predicted.*` so a real upstream sensor
(which writes `flow.measured.*`) never moved the level.
Editor:
- New `holdLevel` and `deadZoneKeepAlivePercent` defaults + side-panel
input rows in the levelbased mode preview.
- Add the missing `ps-mode-line-holdLevel` SVG marker (was declared in
the side-panel coupling but the SVG element didn't exist, so the
dashed line never rendered).
- Relax stopLevel marker gate so it renders for any non-negative typed
value — start/stop ordering is the ribbon's job, not the marker's
(was hiding the line whenever startLevel was momentarily smaller).
- Add holdLevel to the marker loop in mode-preview so changes track.
- Add stopLevel + holdLevel + maxLevel to all three bindRedraw lists
(basin-diagram, mode-preview, bounds.apply) so the SVG, validation
ribbon, and HTML5 min/max attrs update on every edit.
- Initialise stopLevel + holdLevel + deadZoneKeepAlivePercent inputs
in oneditprepare so reopening the editor shows the saved values.
- nodeClass passes holdLevel + deadZoneKeepAlivePercent into the
domain config.
Tests:
- New test/basic/_probe_upstream_emit.test.js: confirms the parent
surfaces flow.measured.upstream.* on Port 0 after a measurement
child write — pins the previously-invisible measured variant flow.
- flowAggregator.basic.test.js: two new regression cases — measured
inflow when predicted side is empty, and the measured-in /
predicted-out mixed case.
- control-levelBased.basic.test.js: new cases for the holdLevel hold
band, the [stopLevel, startLevel] keep-alive, the engagement gate,
and the "0 % at startLevel = setDemand" contract.
- specificClass.test.js: zone tests adjusted to the new ramp foot.
Shifted-ramp tests pin holdLevel = 3 explicitly so their legacy
arithmetic (ramp foot at inflowLevel) stays self-consistent.
- shifted-ramp-end-to-end.test.js: same holdLevel pin for the same
reason.
Packaging:
- Add .gitignore + .npmignore so the published tarball drops the
wiki/, simulations/, test/, tools/, .claude/ etc. The pack went
from 1.5 MB (72 files) to ~57 KB (30 files).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Splits pumpingStation/src/ into focused concern modules. specificClass.js
will be slimmed to an orchestrator in P2.9 (integration); for now both
the inlined logic AND the new modules coexist so tests stay green
throughout.
src/basin/ BasinGeometry + thresholdValidator (pure)
src/measurement/ flowAggregator + measurementRouter + calibration
src/control/ levelBased + flowBased(stub) + manual + index dispatcher
src/safety/ safetyController split into dryRun + overfill rules
src/commands/ registry array + handlers (canonical names from start)
src/editor.js 260 lines of SVG basin-diagram redraw, was inline in .html
examples/standalone-demo.js was if(require.main===module) at bottom of specificClass.js
CONTRACT.md canonical inputs + outputs + emitted events
Modified:
src/specificClass.js removed the 170-line standalone demo block
pumpingStation.html oneditprepare/oneditsave delegate to editor.{init,save}
pumpingStation.js added admin endpoint serving src/editor.js
102 basic tests pass (60 new + 42 existing).
specificClass.js itself is unchanged in behaviour — integration is P2.9.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
