pumpingStation/wiki/Home.md

# pumpingStation

![code-ref](https://img.shields.io/badge/code--ref-b825ac1-blue) ![s88](https://img.shields.io/badge/S88-Process_Cell-0c99d9) ![status](https://img.shields.io/badge/status-trial--ready-brightgreen)

A `pumpingStation` models a wet-well lift station: one basin with sensors, and one or more pumps that move water against an elevation difference. It integrates basin volume each tick, picks a control mode (level-based by default), and sends a demand setpoint to its pumps so the basin level stays inside its safe operating band.

---

## At a glance

| Thing | Value |
|:---|:---|
| What it represents | A wet-well lift station: a basin + N pumps |
| S88 level | Process Cell |
| Use it when | You need to lift water from a low point to a higher one, with sensors driving demand |
| Don't use it for | Pressurised distribution networks (use a pumpingStation cascade or VGC instead), or a single pump with no basin (parent a `rotatingMachine` directly) |
| Children it accepts | `measurement`, `machine`, `machinegroup`, `pumpingstation` |

---

## How it looks in Node-RED

![pumpingStation node and edit dialog](_partial-screenshots/pumpingStation/01-node-and-editor.png)

---

## What it models

A rectangular basin with measured inflow, measured (or pump-summed) outflow, and a level sensor. The diagram below is the live source; open it in [draw.io](https://app.diagrams.net/) to edit.

![Basin model — physical reference diagram](diagrams/basin-model.drawio.svg)

The basin has five horizontal reference lines that matter to the controller:

| Line | Role |
|:---|:---|
| `overflowLevel` | Physical weir crest. Above this level the basin is spilling. |
| `maxLevel` | Demand saturates at 100 % at or above this level. |
| `startLevel` | Falling-ramp returns to 0 % demand here; deadband upper bound. |
| `minLevel` | Below this level the controller commands all pumps off. |
| `dryRunLevel` | Pump-protection cutoff (safety layer, mode-independent). |

---

## Try it — 3-minute demo

Import the basic example flow, deploy, and watch the basin react to inject buttons.

```bash
curl -X POST -H 'Content-Type: application/json' \
  --data @nodes/pumpingStation/examples/01-Basic.json \
  http://localhost:1880/flow
```

![Basic example flow in Node-RED editor](_partial-screenshots/pumpingStation/02-basic-flow.png)

What to click in the dashboard after deploy:

1. `set.mode = levelbased` → the controller switches to level-based mode.
2. `set.inflow = 60 m³/h` → inflow is now feeding the basin.
3. `cmd.calibrate.level = 1.5 m` → the volume integrator syncs to a known level.
4. Watch Port 0 in the debug pane: level rises, predicted volume integrates, demand follows the curve.

![Basic demo — level rises, demand follows](_partial-gifs/pumpingStation/01-basic-demo.gif)

---

## Typical wiring

The two patterns you'll see most.

### Standalone (`01-Basic.json`)

![Standalone wiring — inject buttons → pumpingStation → debug](_partial-screenshots/pumpingStation/03-wiring-standalone.png)

### With a measurement child and an MGC parent

![Integrated wiring — measurement → pumpingStation → MGC → 2 pumps](_partial-screenshots/pumpingStation/04-wiring-integrated.png)

---

## The five things you'll send

| Topic | Payload | What it does |
|:---|:---|:---|
| `set.mode` | `"levelbased"` or `"manual"` | Switches control strategy. Manual exposes `set.demand` as the direct setpoint. |
| `set.demand` | number, m³/h | Operator outflow setpoint. Honoured in `manual` mode. |
| `set.inflow` | number, m³/h | Push a measured inflow into the basin balance (if you don't have a `measurement` child for inflow). |
| `cmd.calibrate.level` | number, m | Sync the volume integrator to a known level reading. Useful at startup. |
| `cmd.calibrate.volume` | number, m³ | Sync the volume integrator to a known volume reading. |

## What you'll see come out

Sample Port 0 message (delta-compressed — only changed fields each tick):

```json
{
  "topic": "pumpingStation#PS1",
  "payload": {
    "level": 1.62,
    "volume": 32.4,
    "direction": "filling",
    "demand": 38,
    "safety": { "blocked": false },
    "etaSeconds": 412
  }
}
```

| Field | Meaning |
|:---|:---|
| `level` | Current basin level (m). Measured if a level `measurement` is registered; predicted otherwise. |
| `volume` | Integrated predicted volume (m³). |
| `direction` | `filling` / `draining` / `steady` based on the flow dead-band. |
| `demand` | What the station is asking its pumps to do (0–100 %). |
| `safety.blocked` | True when the safety layer is overriding the control loop. |
| `etaSeconds` | Predicted time to full (if filling) or empty (if draining). |

---

## Need more?

| Page | What you'll find |
|:---|:---|
| [Reference — Contracts](Reference-Contracts) | Full topic contract, config schema, child registration filters |
| [Reference — Architecture](Reference-Architecture) | Code map, state chart, lifecycle sequence, output ports |
| [Reference — Examples](Reference-Examples) | All shipped example flows + Docker compose snippet + debug recipes |
| [Reference — Limitations](Reference-Limitations) | When not to use this node, known limitations, open questions |

[EVOLV master wiki](https://gitea.wbd-rd.nl/RnD/EVOLV/wiki/Home) · [Topology Patterns](https://gitea.wbd-rd.nl/RnD/EVOLV/wiki/Topology-Patterns) · [Topic Conventions](https://gitea.wbd-rd.nl/RnD/EVOLV/wiki/Topic-Conventions)