feat(registry): AssetResolver + diffuser supplier curves (Jäger / Aerostrip / PIK / PRK)
Two related changes bundled together because the diffuser curve files
only make sense once the registry namespace they live in exists.
src/registry — new asset-metadata resolver:
- AssetResolver with synchronous resolve(namespace, id) + lazy cache,
async refresh() for future remote pulls.
- FileBackend (per-id or single-file layouts, case-insensitive) and a
stub HttpBackend (disabled unless EVOLV_ASSET_REMOTE=1).
- Namespaces: curves, menu, monsterSamples, monsterSpecs, units. Menu
namespace re-keys by inner softwareType + filename so editors that
pass either string resolve to the same tree.
- README explains how to add a namespace.
- AssetCategoryManager (datasets/assetData/index.js) becomes a thin
facade over the resolver so existing consumers don't move.
- 246/246 tests pass — including the 39-test registry suite.
datasets/assetData — file moves + new diffuser data:
- modelData/*.json deleted; curves/*.json is the canonical home.
- New diffuser.json menu tree with GVA, Jäger, Aquaconsult/Entec,
PIK/PRK suppliers.
- gva-elastox-r.json migrated from the inline _loadSpecs hardcode,
re-tagged coverageBasis="bottom-coverage-pct" (the legacy 2.4
elements/m² was a prior mis-conversion; we can't recover the
original % so it's a single-point curve under key "0").
- jaeger-jetflex-td-65-2-g-epdm-1000.json — extracted from the Jäger
EPDM-1000mm SSOTE/DWP chart on the data sheet (vector-PDF read).
SSOTE 8.20→6.40 %/m, DWP 25→48 mbar across Q 2-12 Nm³/h. Single
coverage (vendor doesn't state test conditions).
- aerostrip-phoenix.json — 4-coverage SOTE family at 4.75 m water
depth (DD 5/10/15/20 %, flux 10-70 Nm³/h·m²) from the Entec/de
Winter 2023-11-22 dataset; DWP curve from the 21 % @ 4.05 m chart.
- pik300.json / prk300.json — 5-coverage SOTE + SSOTR (DD 5-25 %)
with split DWP per model variant, water depth ≈ 4.0 m inferred from
the SOTE↔SSOTR ratio in the source spreadsheet.
src/configs/diffuser.json:
- New asset.{model, assetTagNumber} block so the editor's selected
model id survives validation.
- diffuser.density description corrected to "Bottom coverage [%]";
default 2.4 → 15 (typical fine-bubble install).
src/configs/{rotatingMachine,valve}.json: small alignment edits that
came with the registry phase.
src/menu/asset.js + src/menu/aquonSamples.js: rewritten as facades
over assetResolver, keeping the editor-side cascade behaviour intact.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
2026-05-12 17:12:13 +02:00
{
"_meta" : {
"supplier" : "Aquaconsult Anlagenbau / Entec" ,
"type" : "Strip" ,
"model" : "AEROSTRIP" ,
"membrane" : "PHOENIX" ,
2026-05-12 18:16:34 +02:00
"membraneArea_m2_per_element" : 1.0 ,
"membraneArea_m2_per_element_note" : "Aerostrip strips are sized continuously rather than as discrete fixed-area elements. Setting per-element area to 1.0 m² is a normalisation choice: configure the diffuser node with `elements` equal to the total installed strip membrane area in m²." ,
feat(registry): AssetResolver + diffuser supplier curves (Jäger / Aerostrip / PIK / PRK)
Two related changes bundled together because the diffuser curve files
only make sense once the registry namespace they live in exists.
src/registry — new asset-metadata resolver:
- AssetResolver with synchronous resolve(namespace, id) + lazy cache,
async refresh() for future remote pulls.
- FileBackend (per-id or single-file layouts, case-insensitive) and a
stub HttpBackend (disabled unless EVOLV_ASSET_REMOTE=1).
- Namespaces: curves, menu, monsterSamples, monsterSpecs, units. Menu
namespace re-keys by inner softwareType + filename so editors that
pass either string resolve to the same tree.
- README explains how to add a namespace.
- AssetCategoryManager (datasets/assetData/index.js) becomes a thin
facade over the resolver so existing consumers don't move.
- 246/246 tests pass — including the 39-test registry suite.
datasets/assetData — file moves + new diffuser data:
- modelData/*.json deleted; curves/*.json is the canonical home.
- New diffuser.json menu tree with GVA, Jäger, Aquaconsult/Entec,
PIK/PRK suppliers.
- gva-elastox-r.json migrated from the inline _loadSpecs hardcode,
re-tagged coverageBasis="bottom-coverage-pct" (the legacy 2.4
elements/m² was a prior mis-conversion; we can't recover the
original % so it's a single-point curve under key "0").
- jaeger-jetflex-td-65-2-g-epdm-1000.json — extracted from the Jäger
EPDM-1000mm SSOTE/DWP chart on the data sheet (vector-PDF read).
SSOTE 8.20→6.40 %/m, DWP 25→48 mbar across Q 2-12 Nm³/h. Single
coverage (vendor doesn't state test conditions).
- aerostrip-phoenix.json — 4-coverage SOTE family at 4.75 m water
depth (DD 5/10/15/20 %, flux 10-70 Nm³/h·m²) from the Entec/de
Winter 2023-11-22 dataset; DWP curve from the 21 % @ 4.05 m chart.
- pik300.json / prk300.json — 5-coverage SOTE + SSOTR (DD 5-25 %)
with split DWP per model variant, water depth ≈ 4.0 m inferred from
the SOTE↔SSOTR ratio in the source spreadsheet.
src/configs/diffuser.json:
- New asset.{model, assetTagNumber} block so the editor's selected
model id survives validation.
- diffuser.density description corrected to "Bottom coverage [%]";
default 2.4 → 15 (typical fine-bubble install).
src/configs/{rotatingMachine,valve}.json: small alignment edits that
came with the registry phase.
src/menu/asset.js + src/menu/aquonSamples.js: rewritten as facades
over assetResolver, keeping the editor-side cascade behaviour intact.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
2026-05-12 17:12:13 +02:00
"stdAir" : { "temp_C" : 0 , "pressure_mbar" : 1013.25 , "RH_pct" : 0 } ,
"coverageBasis" : "bottom-coverage-pct" ,
"coverageReference" : [ 5 , 10 , 15 , 20 ] ,
"dataQuality" : "multi-coverage" ,
"xAxisBasis" : "per-m2-membrane-Nm3h" ,
"yAxisBasis" : "ssotr-g-per-Nm3-per-m" ,
"waterDepth_m" : 4.75 ,
"sources" : [
2026-05-12 18:16:34 +02:00
"Floris de Winter (Entec Holland) email to R. de Ren on 2023-11-22 — tabulated SOTE [%] at 4.75 m water depth for bottom coverage 5/10/15/20 % at fluxes 10/25/40/55/70 Nm³/(h*m² membrane). Original chart in 'SSOTE_4.75m different density.pdf'." ,
feat(registry): AssetResolver + diffuser supplier curves (Jäger / Aerostrip / PIK / PRK)
Two related changes bundled together because the diffuser curve files
only make sense once the registry namespace they live in exists.
src/registry — new asset-metadata resolver:
- AssetResolver with synchronous resolve(namespace, id) + lazy cache,
async refresh() for future remote pulls.
- FileBackend (per-id or single-file layouts, case-insensitive) and a
stub HttpBackend (disabled unless EVOLV_ASSET_REMOTE=1).
- Namespaces: curves, menu, monsterSamples, monsterSpecs, units. Menu
namespace re-keys by inner softwareType + filename so editors that
pass either string resolve to the same tree.
- README explains how to add a namespace.
- AssetCategoryManager (datasets/assetData/index.js) becomes a thin
facade over the resolver so existing consumers don't move.
- 246/246 tests pass — including the 39-test registry suite.
datasets/assetData — file moves + new diffuser data:
- modelData/*.json deleted; curves/*.json is the canonical home.
- New diffuser.json menu tree with GVA, Jäger, Aquaconsult/Entec,
PIK/PRK suppliers.
- gva-elastox-r.json migrated from the inline _loadSpecs hardcode,
re-tagged coverageBasis="bottom-coverage-pct" (the legacy 2.4
elements/m² was a prior mis-conversion; we can't recover the
original % so it's a single-point curve under key "0").
- jaeger-jetflex-td-65-2-g-epdm-1000.json — extracted from the Jäger
EPDM-1000mm SSOTE/DWP chart on the data sheet (vector-PDF read).
SSOTE 8.20→6.40 %/m, DWP 25→48 mbar across Q 2-12 Nm³/h. Single
coverage (vendor doesn't state test conditions).
- aerostrip-phoenix.json — 4-coverage SOTE family at 4.75 m water
depth (DD 5/10/15/20 %, flux 10-70 Nm³/h·m²) from the Entec/de
Winter 2023-11-22 dataset; DWP curve from the 21 % @ 4.05 m chart.
- pik300.json / prk300.json — 5-coverage SOTE + SSOTR (DD 5-25 %)
with split DWP per model variant, water depth ≈ 4.0 m inferred from
the SOTE↔SSOTR ratio in the source spreadsheet.
src/configs/diffuser.json:
- New asset.{model, assetTagNumber} block so the editor's selected
model id survives validation.
- diffuser.density description corrected to "Bottom coverage [%]";
default 2.4 → 15 (typical fine-bubble install).
src/configs/{rotatingMachine,valve}.json: small alignment edits that
came with the registry phase.
src/menu/asset.js + src/menu/aquonSamples.js: rewritten as facades
over assetResolver, keeping the editor-side cascade behaviour intact.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
2026-05-12 17:12:13 +02:00
"'SSOTR_dP.pdf' — AEROSTRIP fine-bubble diffuser SSOTR + Druckverlust (DWP) chart at water depth 4.05 m, blow-in depth 4.00 m, 21 % bottom coverage. Used for the DWP curve only (read off the vector chart)."
] ,
2026-05-12 18:16:34 +02:00
"note" : "SSOTR values are SOTE [%] / water_depth_m × 0.299 kg-O₂/Nm³ × 10 (linear depth scaling). DWP curve was measured at 21 % bottom coverage; pressure loss is intrinsic to the diffuser geometry so the curve is shared across coverage values (single 'p_curve' entry under key '0')."
feat(registry): AssetResolver + diffuser supplier curves (Jäger / Aerostrip / PIK / PRK)
Two related changes bundled together because the diffuser curve files
only make sense once the registry namespace they live in exists.
src/registry — new asset-metadata resolver:
- AssetResolver with synchronous resolve(namespace, id) + lazy cache,
async refresh() for future remote pulls.
- FileBackend (per-id or single-file layouts, case-insensitive) and a
stub HttpBackend (disabled unless EVOLV_ASSET_REMOTE=1).
- Namespaces: curves, menu, monsterSamples, monsterSpecs, units. Menu
namespace re-keys by inner softwareType + filename so editors that
pass either string resolve to the same tree.
- README explains how to add a namespace.
- AssetCategoryManager (datasets/assetData/index.js) becomes a thin
facade over the resolver so existing consumers don't move.
- 246/246 tests pass — including the 39-test registry suite.
datasets/assetData — file moves + new diffuser data:
- modelData/*.json deleted; curves/*.json is the canonical home.
- New diffuser.json menu tree with GVA, Jäger, Aquaconsult/Entec,
PIK/PRK suppliers.
- gva-elastox-r.json migrated from the inline _loadSpecs hardcode,
re-tagged coverageBasis="bottom-coverage-pct" (the legacy 2.4
elements/m² was a prior mis-conversion; we can't recover the
original % so it's a single-point curve under key "0").
- jaeger-jetflex-td-65-2-g-epdm-1000.json — extracted from the Jäger
EPDM-1000mm SSOTE/DWP chart on the data sheet (vector-PDF read).
SSOTE 8.20→6.40 %/m, DWP 25→48 mbar across Q 2-12 Nm³/h. Single
coverage (vendor doesn't state test conditions).
- aerostrip-phoenix.json — 4-coverage SOTE family at 4.75 m water
depth (DD 5/10/15/20 %, flux 10-70 Nm³/h·m²) from the Entec/de
Winter 2023-11-22 dataset; DWP curve from the 21 % @ 4.05 m chart.
- pik300.json / prk300.json — 5-coverage SOTE + SSOTR (DD 5-25 %)
with split DWP per model variant, water depth ≈ 4.0 m inferred from
the SOTE↔SSOTR ratio in the source spreadsheet.
src/configs/diffuser.json:
- New asset.{model, assetTagNumber} block so the editor's selected
model id survives validation.
- diffuser.density description corrected to "Bottom coverage [%]";
default 2.4 → 15 (typical fine-bubble install).
src/configs/{rotatingMachine,valve}.json: small alignment edits that
came with the registry phase.
src/menu/asset.js + src/menu/aquonSamples.js: rewritten as facades
over assetResolver, keeping the editor-side cascade behaviour intact.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
2026-05-12 17:12:13 +02:00
} ,
"sote_curve" : {
"5" : { "x" : [ 10 , 25 , 40 , 55 , 70 ] , "y" : [ 34.20 , 28.75 , 26.16 , 24.89 , 24.19 ] } ,
"10" : { "x" : [ 10 , 25 , 40 , 55 , 70 ] , "y" : [ 42.01 , 35.32 , 32.14 , 30.58 , 29.71 ] } ,
"15" : { "x" : [ 10 , 25 , 40 , 55 , 70 ] , "y" : [ 43.39 , 36.48 , 33.20 , 31.59 , 30.69 ] } ,
"20" : { "x" : [ 10 , 25 , 40 , 55 , 70 ] , "y" : [ 43.80 , 36.82 , 33.51 , 31.88 , 30.97 ] }
} ,
"ssote_curve" : {
"5" : { "x" : [ 10 , 25 , 40 , 55 , 70 ] , "y" : [ 7.20 , 6.05 , 5.51 , 5.24 , 5.09 ] } ,
"10" : { "x" : [ 10 , 25 , 40 , 55 , 70 ] , "y" : [ 8.84 , 7.44 , 6.77 , 6.44 , 6.26 ] } ,
"15" : { "x" : [ 10 , 25 , 40 , 55 , 70 ] , "y" : [ 9.14 , 7.68 , 6.99 , 6.65 , 6.46 ] } ,
"20" : { "x" : [ 10 , 25 , 40 , 55 , 70 ] , "y" : [ 9.22 , 7.75 , 7.06 , 6.71 , 6.52 ] }
} ,
"otr_curve" : {
"5" : { "x" : [ 10 , 25 , 40 , 55 , 70 ] , "y" : [ 21.53 , 18.10 , 16.47 , 15.67 , 15.23 ] } ,
"10" : { "x" : [ 10 , 25 , 40 , 55 , 70 ] , "y" : [ 26.44 , 22.23 , 20.23 , 19.25 , 18.70 ] } ,
"15" : { "x" : [ 10 , 25 , 40 , 55 , 70 ] , "y" : [ 27.31 , 22.96 , 20.90 , 19.89 , 19.32 ] } ,
"20" : { "x" : [ 10 , 25 , 40 , 55 , 70 ] , "y" : [ 27.57 , 23.18 , 21.10 , 20.06 , 19.49 ] }
} ,
"p_curve" : {
2026-05-12 18:16:34 +02:00
"0" : {
feat(registry): AssetResolver + diffuser supplier curves (Jäger / Aerostrip / PIK / PRK)
Two related changes bundled together because the diffuser curve files
only make sense once the registry namespace they live in exists.
src/registry — new asset-metadata resolver:
- AssetResolver with synchronous resolve(namespace, id) + lazy cache,
async refresh() for future remote pulls.
- FileBackend (per-id or single-file layouts, case-insensitive) and a
stub HttpBackend (disabled unless EVOLV_ASSET_REMOTE=1).
- Namespaces: curves, menu, monsterSamples, monsterSpecs, units. Menu
namespace re-keys by inner softwareType + filename so editors that
pass either string resolve to the same tree.
- README explains how to add a namespace.
- AssetCategoryManager (datasets/assetData/index.js) becomes a thin
facade over the resolver so existing consumers don't move.
- 246/246 tests pass — including the 39-test registry suite.
datasets/assetData — file moves + new diffuser data:
- modelData/*.json deleted; curves/*.json is the canonical home.
- New diffuser.json menu tree with GVA, Jäger, Aquaconsult/Entec,
PIK/PRK suppliers.
- gva-elastox-r.json migrated from the inline _loadSpecs hardcode,
re-tagged coverageBasis="bottom-coverage-pct" (the legacy 2.4
elements/m² was a prior mis-conversion; we can't recover the
original % so it's a single-point curve under key "0").
- jaeger-jetflex-td-65-2-g-epdm-1000.json — extracted from the Jäger
EPDM-1000mm SSOTE/DWP chart on the data sheet (vector-PDF read).
SSOTE 8.20→6.40 %/m, DWP 25→48 mbar across Q 2-12 Nm³/h. Single
coverage (vendor doesn't state test conditions).
- aerostrip-phoenix.json — 4-coverage SOTE family at 4.75 m water
depth (DD 5/10/15/20 %, flux 10-70 Nm³/h·m²) from the Entec/de
Winter 2023-11-22 dataset; DWP curve from the 21 % @ 4.05 m chart.
- pik300.json / prk300.json — 5-coverage SOTE + SSOTR (DD 5-25 %)
with split DWP per model variant, water depth ≈ 4.0 m inferred from
the SOTE↔SSOTR ratio in the source spreadsheet.
src/configs/diffuser.json:
- New asset.{model, assetTagNumber} block so the editor's selected
model id survives validation.
- diffuser.density description corrected to "Bottom coverage [%]";
default 2.4 → 15 (typical fine-bubble install).
src/configs/{rotatingMachine,valve}.json: small alignment edits that
came with the registry phase.
src/menu/asset.js + src/menu/aquonSamples.js: rewritten as facades
over assetResolver, keeping the editor-side cascade behaviour intact.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
2026-05-12 17:12:13 +02:00
"x" : [ 5 , 10 , 25 , 40 , 55 , 70 , 80 ] ,
"y" : [ 46.0 , 47.3 , 51.1 , 54.9 , 58.7 , 62.4 , 65.0 ]
}
}
}